Posted on by Miriam Goldstein

How do you figure out how much plastic is in the ocean?

Nobody ever told me that becoming a marine biologist would involve spending four years figuring out how to count. Because, seriously, how hard can counting be? Well, it turns out, when you’re trying to count tiny pieces of plastic in the ocean, it gets complicated really fast.

When I went out to the North Pacific Subtropical Gyre in 2009 and 2010, part of the goal was to figure out how much plastic debris was actually there. That’s the first step to understanding what impact it might be having the ecosystem, after all. So we towed a net around on the surface, and towed a net underwater, and made visual counts of the plastic floating by on the ocean’s surface. Between the two cruises, we had measurements of plastic quantity over 6,000 miles of ocean – we were all set, right?

spacer

Double rainbow in the Gyre! Everything’s under control! Until we get back to shore…

But when we started to analyze the data, things got complicated. The quantity of trash was hugely variable. Tows taken right next to each other, or taken in around the same location a year apart, had very different quantities of plastic. In order to get a handle on why this was, I teamed up with Andrew Titmus, an ornithologist who did the visual counts of floating plastic on our 2009 cruise, and Mike Ford, a NOAA oceanographer who was Chief Scientist on the 2010 cruise. The results were published in PLOS ONE last week, and NOAA has a brief writeup here.

The paper was hard to write, because it’s essentially “here’s a bunch of things that you should know about where plastic is in the quote-unquote garbage patch,” or, as I very scientifically referred to it on Twitter, a giant BLORT of data. I’m going to highlight a couple major points, but feel free to check out the paper yourself and ask more questions below.

1. Wind matters. 

When the ocean is really calm, the plastic bobs to the surface and there’s a lot of it. When the wind kicks up and the ocean gets choppy, the plastic gets mixed below the surface, and you can’t capture it in a surface-towed net (which is the standard way to measure plastic). Our plastic counts go way down once the wind gets to a certain point, regardless of where we are in the ocean. Giora Proskurowski & colleagues found a similar phenomenom in the Atlantic.

 

spacer

On a flat-calm day, tons of these little flecks of microplastic float to the surface. You can see them around the quadrat that I’m holding. (For all you benthic ecologists out there, yes indeed, I am pretty sure I AM the only person to use a quadrat while floating in the middle of the ocean, thank you very much.)

spacer

On this rough day, most of the plastic (and zooplankton) got mixed below the surface. No, I didn’t get much work done. Yes, it was a super fun day.

2. Filtering tiny amounts of plastic out of the ocean takes out a lot of life, too. 

For every 1000 grams (2 lbs) of plastic bits we removed from the water, we took out 731 grams (1.6 lbs) of ocean life, primarily zooplankton and baby fish. That’s a lot of critters, particularly since life is relatively sparse in the North Pacific Gyre. Remediation schemes will have to be sure that they are not causing more damage than they’re solving. For more on that, check out the Open Ocean Cleanup Guidelines.

spacer

Zooplankton, y u so small? Photo by J. Leichter.

3. Since plastic varies so much, it’s going to take a lot of work to figure out whether it’s increasing or decreasing. 

We used our data to create an imaginary future where plastic had increased between 10% and 100%. It turns out that it’s really hard to detect even relatively large increases in plastic with reasonable certainty. On the 2009 cruise, we worked our butts off for three weeks to take 119 surface samples (and it took me over a year, a lot of bad R code, and the help of awesome volunteers to convert jars of plankton and plastic into data). Unfortunately, it would take 250 surface samples to detect a 50% increase in microplastic with 80% probability. We’re going to have to figure out a better way to do that, or we won’t be able to tell if the problem is getting better, or getting worse.

spacer

This is a figure from the paper. The top shows how many samples you’d have to take to figure out how much plastic has increased, with various levels of statistical certainty (red is good). The bottom shows how many samples you’d have to take to reduce the variability as much as it can be reduced.

So, what’s the take-home of this paper? We can’t go waltzing into the Gyre wanting to do everything at once (like I did in 2009 *cough cough*). To be effective, expeditions on the science of plastic debris need to think about what their specific objectives are. Want to study the animals growing right on the plastic? Target the rarer large floating objects. Want to get a glimpse of how the widest array of ocean life is interacting with plastic? Seek out trash stuck in eddies, where temporary pulses of high-nutrient water cause plankton to grow and attract fish.

If you want more, data from this paper is archived online at the CCE LTER Datazoo, and figures that didn’t quite fit into the paper, such as the types of plastic we collected, can be found over on Figshare. Want to know more about what all this plastic is doing to marine life? Check out Chelsea’s guest post and new paper on what happens when fish eat plastic, and Mark Browne’s new paper (with BBC article!) on lugworms. And as always, I’m happy to answer your questions in the comment thread.

 

Share the post "How do you figure out how much plastic is in the ocean?"

  • Facebook
  • Twitter
  • Google+
  • Pinterest
  • Digg
  • E-mail

Related Posts

  • spacer Behind the scenes: plastic-eating barnacles in the North Pacific Gyre
  • spacer The scariest inhabitant of the Great Pacific Garbage Patch is not what you think
  • spacer Plastics expedition departs for North Pacific
  • spacer Talking Trash at Georgia Aquarium Science on Tap
  • spacer Three Ways of Looking at the Great Pacific Garbage Patch
spacer Miriam Goldstein (230 Posts)


New Research, Open Access, Plastic
Tagged North Pacific Gyre, Pacific Garbage Patch, pelagic, plastic pollution
25 comments on “How do you figure out how much plastic is in the ocean?
  1. spacer waidt

    Thanks for these posts on plastic debris. It’s an issue I am interested in and I look forward to more posts on the subject.

    • spacer Miriam Goldstein

      Glad you find them useful!

  2. spacer Wayne

    Miriam,

    OK, you wrote a lot. But, you did not really tell me much …. So, I will point out what I felt as I read your blog. And then I will mention what I ‘noticed.’

    Your blog post read like you were trying to just ‘kick the ball down the road.’

    I appreciate your honesty about the topic. Plastic in the ocean is not at the top of my list of priorities, but I do not think we need to pollute just because we can.

    So, I would like to point out one observation I made about your data.

    There is about as much surface plastic in the gyre as there is marine life …. 50% life and 50% plastic does not sound good to me.

    Thank you,

    Wayne
    luvsiesous.com

    • spacer Miriam Goldstein

      One blog post can’t do everything! This particular post was about how to measure the amount of plastic in the ocean. I’ve written extensively about the “not good” parts elsewhere – see here, here, here, and Chelsea Rochman’s guest post here.

  3. spacer Michael Lederman

    So filtering my morning coffee is possible, sucking up oil infused water and separating the two is possible, and of course any attempt to remove the plastic will kill sea life but the plastic itself is killing sea life.

    Really, you have a problem with this article. Either is is possible and should be done. It is possible and shouldn’t for a valid reason or it’s not possible.

    We know it Is possible and that tis far, far better to remove it then let it stay.

    • spacer Miriam Goldstein

      It’s a pretty big deal to kill most of the sea life on the ocean’s surface! We need to be really, really sure that removing the plastic is the right solution before spending billions of dollars to essentially clear-cut the surface of the large swaths of the ocean. That evidence is not there yet.

  4. spacer Tyrus

    Miriam, Great Data! The problem as I see it is how to sort the microlife from the microplastic. Optical sorting systems could be modified for this purpose, They are in use for sorting seeds about the same size as the plankton in the picture. Thanks for the work you are doing!

    • spacer Miriam Goldstein

      Oh, man, automatic sorting of plankton samples would be amazing (this would only work for dead, preserved plankton – there’s no way live plankton would be viable after sorting). It took a minimum of 2 hours per sample (often more like 4) to sort the plastic out under the microscope. Automated sorting could increase the sample size wonderfully.

  5. spacer Kerra

    I’ve always wondered why there hasn’t been a widespread effort to remove the garbage patch, and now I know. Thank you. Looking forward to learning more, hopefully a solution can be found that minimizes loss of life.