|
|
Aluminum Filled Epoxy Casting Resin - 100 Minute Cure
Aluminum Filled Epoxy Casting Resin is a versatile, room-temperature system designed for applications where high-impact resistance is paramount. This casting resin is easy to mix and pour and exhibits a beautiful aluminum appearance. It can be surface cast to metal or other low-cost cores, or it can be mass cast. Aluminum Filled Epoxy Casting Resin captures complex tool detail and can be machined.
Typical applications for Aluminum Filled Epoxy Casting Resin include: casting surfaces, stretch form tools, thermoforming tools, vacuum forming tools, prototype stamping dies, and high detail tools.
- Mix Ratio – 100R:10H (parts by weight)
- Pot Life – 100 minutes
- Peak Operating Temperature - 210°F
- Cure Time – 18-36 hours
- Cured Color – Aluminum
|
|
|
Polyester Laminating Resin
Waxed for Top or Finish Coats #83 is a waxed resin for laminating thin fiberglass skins on plywood, or for general purpose fiberglass repairs. The wax in the resin will prevent surface tackiness even when applied in thin coats. Sand off the wax layer before painting or secondary bonding. Stir thoroughly in can before using.
Formulated for 1.25% MEKP.
83/69-A kit contains (1) QUART RESIN, (1) 69-A. 83/69-AK kit contains (12) QUARTS RESIN, (12) 69-A. 83/69-B kit contains (1) GAL RESIN, (2) 69-A. 83/69-BK kit contains (4) GAL RESIN, (8) 69-A.
|
|
|
High Temp Epoxy Resin - 45 min cure
For tooling and components that will operate in intermediate/high temperature service environments, use this High Temp Epoxy Resin. When post-cured, this unfilled, amber epoxy laminating resin system offers maximum stability in service applications involving frequent heating and cooling cycles. #3000/3045 High Temperature Epoxy Resin easily wets-out reinforcing fabric for quick, stable fabrications.
Cure using a ramp up cure schedule requiring at most 300°F
For maximum stability in any application, an oven post-cure is strongly recommended. This epoxy laminating system will gel hard in 18 to 24 hours at 77°F, but for applications where continuous service temperature is over 250°F, a post-cure is mandatory. Allow the High Temperature Epoxy Resin to gel at room temperature before initiating an oven post-cure.
#3000/3045 High Temp Epoxy Resin can be used with #1096 High Temp Epoxy Surface Coat. When used together, High Temp Epoxy Resin and High Temp Epoxy Surface Coat can create tough, durable, heat resistant tools.
- Mix Ratio (by weight) – 100:16
- Pot Life @ 77°F – 45-50 minutes
- Color – Amber
- Maximum Service Temperature – 270ºF
Post Cure Cycle
- Ramp up temperature at a rate of no more than 2-5°F per minute.
- Hold @ 150°F, 250°F, and 300°F for 3 hours each.
- Ramp down temperature to 100°F at a rate of no more than 2-5°F per minute. Do not shut down the oven and leave to cool.
|
|
|
Acid Brush
Resistant to heat and cleaning solvents, this durable Acid Brush is great for brushing surface coat or casting resin onto small, detailed surfaces. This tough, horsehair bristle brush is an excellent tool to avoid air bubbles while brushing material into complex molds.
- Fill Type – Horsehair
- Brush Width – 3/8"
- Brush Thickness – 3/16"
- Bristle Length – 3/4"
- Overall Length – 6"
|
|
|
Polyurethane Tooling Board - 71 lbs/cu ft
This high-density Polyurethane Tooling Board is ideal for machining extremely durable prototypes, foundry patterns, and tools that require incredible wear resistance and impact resistance. A tough, cost effective alternative to metal, #4104 Polyurethane Tooling Board can produce high volume patterns that will combat the harshest production applications.
When machined, #4104 Polyurethane Tooling Board produces flakes instead of dust. To repair, bond, or smooth this tooling board, use #4107 Epoxy Plank Patch Paste Kit. Other applications for Polyurethane Tooling Board include: core boxes, match plates, metal forming, hammer forming, stretch press dies, hemming bucks and hydroform tooling.
Fibre Glast carries a convenient size of Polyurethane Tooling Board. This size isn't available anywhere else! For small to medium sized projects, we have the perfect size board!
- Red
- Density – 71 lbs/ft3
- Hardness – 80 Shore D
- Heat Deflection Temperature @ 264 psi – 192°F
- Commonly called "The Red Board"
- Abrasion and Impact Resistant
- *MACHINE ONLY WITH CARBIDE TOOLS
|
|
|
Large Regulator / Filter
Industrial Environment Moisture Containment and Pressure Control This industrial style Regulator/Filter has a larger filter than our #2215-A and includes a metal shield to protect the polycarbonate cup. A thumb screw at the bottom allows for easy draining of any liquids that accumulate in the cup. . Install this Regulator/Filter in your line close to your air source to filter out any moisture or debris as well as to dial in and maintain your air pressure. This unit can be used on our #2229-A or #1148-A Vacuum Generators, any of our Gel Coat Spray Guns and our #171-A Chopper Gun. Max PSI 150. Connection to our #171 Chopper Gun, #120 or #836 Gel Coat Spray Guns require a #2222 Male Nipple. Connection to our #123 or #126 Gel Coat Touch Up Guns require a #2223-A Female Nipple.
|
|
|
Dry Gas Blanket
Use this Dry Gas Blanket to extend the life of liquids including: urethanes, epoxy resin, polyester resin, gel coat, vinyl ester resin, and much more. Dry Gas Blanket can be sprayed into an open container just before resealing the lid. This displaces the moist air in the container and extends the shelf life of the liquid inside.
This Dry Gas Blanket is non-flammable and contains no Class 1 ozone depleting materials.
|
|
|
Prepreg 3K, 2x2 Twill Weave Carbon
50" Wide. Our most popular carbon in prepreg form. Identical to part# 1069, this prepreg offers the advantages of pre-impregnation of an epoxy resin system. The material can be stored, shipped and handled at room temperatures and is cured using ramp up schedule requiring at most 310°F. Resin content 33.00% - 39.0%
|
|