MemeMaker

200,00 DKK

The Arduino Uno Rev3 is the newest version of our most popular product, the Arduino Uno - a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.

Learn More

179,00 DKK

The Arduino Leonardo is a microcontroller board based on the ATmega32u4 (datasheet). It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

Learn More

179,00 DKK

The Arduino Leonardo is a microcontroller board based on the ATmega32u4 (datasheet). It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

Learn More

230,00 DKK

The Arduino Motor Shield is based on the L298 (datasheet), which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors. It lets you drive two DC motors with your Arduino board, controlling the speed and direction of each one independently. You can also measure the motor current absorption of each motor, among other features. The shield is TinkerKit compatible, which means you can quickly create projects by pluggingTinkerKit modules to the board.

Learn More

429,00 DKK

The Arduino Ethernet Shield connects your Arduino to the internet in mere minutes. Just plug this module onto your Arduino board, connect it to your network with an RJ45 cable (not included) and follow a few simple instructions to start controlling your world through the internet. 

Learn More

224,00 DKK

Open Softwear is a book about fashion and technology. More precisely it is a book about Arduino boards, conductive fabric, resistive thread, soft buttons, LEDs, and some other things. We started researching five years ago thanks to the support of K3,  School of Arts and Communication, Malmö University, Sweden.

Learn More

650,00 DKK

The Arduino WiFi Shield connects your Arduino to the internet wirelessly. Connect it to your wireless network by following a few simple instructions to start controlling your world through the internet. As always with Arduino, every element of the platform – hardware, software and documentation – is freely available and open-source. This means you can learn exactly how it's made and use its design as the starting point for your own circuits.

Learn More

249,00 DKK

Nabduino - no firewall hassle! Nabduino is a hardware prototyping board created by Nabto for prototyping the Nabto communication platform. If you want to easily remote monitor or develop a nice web-interface on your embedded device, the Nabduino is something for you. Learn More

439,00 DKK

The Arduino Mega 2560 is a microcontroller board based on the ATmega2560 (datasheet). It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.

Learn More

250,00 DKK

Plaast is a versatile plastic material, ideal for crafting, repairing and prototyping. It is very easy to use, even of you have no experience beforehand.

The material can be molten in hot water where it, and once it becomes completely transparent, can be brought into any shape. When cooled off completely, it is extremely sturdy and can be machined easily.

For inspiration on use cases, see the links below or on the product page.

Learn More

549,00 DKK

The Arduino Mega ADK is a microcontroller board based on the ATmega2560 (datasheet). It has a USB host interface to connect with Android based phones.

Learn More

875,00 DKK

New from the fine people who have brought us the Beagle Board, we now have a smaller, lighter, but powerful single board linux computer, Beagle Bone! We like this move to a more compact and integrated SBC. For example, there is onboard Ethernet and USB host, as well as a USB client interface (a FTDI chip for shell access). It even comes preloaded with Angstrom Linux on the 4 GB microSD card! 

Package includes:

• Fully assembled and tested BeagleBone A4
• Mini-B USB cable
• 4 GB microSD card with preloaded Angstrom Linux
• MicroSD to SD card adapter

Learn More

93,75 DKK

Add some circuitry to your Beagle Bone with the lovely Proto Cape. If you have a 'Bone you need one of these! This PCB fits neatly on top of a Beagle Bone, without getting in the way of the Ethernet jack, and provides a breakout to both 46 pin headers - with individual numbering to keep them straight. We also threw down some strips to access the 5V and 3V power supplies as well as two SMT breakouts, one for SOIC-8's and one for SOT-23's. Learn More

100,00 DKK

This is a thorough introduction, updated for Arduino 1.0. It gives you lots of ideas for projects and helps you work with them right away. From getting organized to putting the final touches on your prototype, all the information you need is here! Inside, you’ll learn about:     - The Arduino hardware and software development environment     - Basics of electricity and electronics     - Prototyping on a solderless breadboard     - Drawing a schematic diagram

 

Learn More

58,00 DKK

We now have the plates from the ARDX available separately. Acrylic plate is engraved and cut here at the Adafruit factory. There are mounting holes for your Arduino and a space that fits a half sized breadboard very nicely.

THIS DOES NOT FIT THE ARDUINO MEGA.

Learn More

45,00 DKK

This is a 9V battery pack with on/off switch and a pre-attached 5.5mm/2.1mm barrel plug. Use this to battery-power your Arduino (or other electronic projects) - it's ready to go out of the box! Battery not included. Learn More

363,00 DKK

The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.0) or ATmega168 (Arduino Nano 2.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one. The Nano was designed and is being produced by Gravitech.

Learn More

330,00 DKK

Kit with parts to participate in an Arduino Workshop. Learn More

400,00 DKK

The Arduino Mega 2560 is a microcontroller board based on the ATmega2560 (datasheet). It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.

The Mega 2560 is an update to the Arduino Mega 1280, which it replaces.

Learn More