Spray Etching Machines
Rota-Spray and 'Rota-Spray Plus'
Rota-Spray 'Plus'
|
A Spray Processor with many advanced features making an ideal upgrade to a Bubble Etch Tank. The Rota-Spray is a Spray Processor with an in-built Spray Wash Tank and is normally used for Etch / Spray Wash. The 'Rota-Spray Plus' features an additional static unheated Developing Tank enabling the unit to be used as an Develop / Spray Wash / Spray Etch combination. Both units feature:
|
Click below image for Rota-Spray Plus Video |
|||
Order Code | Description | 1+ | Qty: |
500-702 | Rota-Spray Processor 10" x 12" | 1004.00 | |
500-713 | Rota-Spray 'Plus' Develop / Wash / Etch | 1158.00 | |
500-707 | Rota-Spray Base Unit | 87.00 | |
500-703 | Rota-Spray Processor 10" x 12" 110v 60Hz version | 1175.00 | |
500-706 | ROTA SPRAY BOARD HOLDER | 38.00 | |
Rota-Spray Water Boost Base Unit
Having a good pressure of water supply connected to your Rota-Spray ensures fast efficient spray washing of your PCBs and prevents chemical cross-contamination. When local pressure is low the 500-030 Rota-Spray Water Boost Base Unit should be considered in place of a standard Base Unit. The Water Boost Base Unit contains a chamber of mains water and a submersible pump to ensure high water pressure is delivered to your spray wash tank. Requires a mains water inlet, water feed, waste water facility for overflow and 13amp supply. Conforms to water bylaws.Click here for full instructions.
Order Code | Description | 1+ | Qty: |
500-030 | ROTA-SPRAY WATER BOOST BASE UNIT | 345.00 | |
Rota-Station and Rota-Station 'Plus' PCB Processing Unit
This new product incorporates a Rota-Spray or Rota-Station Plus with two digitally controlled heated PCB tanks, a Spray Wash Tank and a Processing Sink to offer a comprehensive PCB Production Solution. For those that already have one the Rota-Station is available without a Rota-Spray. Rota-Station Rota-Station Plus |
Dimensions as shown above |
Order Code | Description | 1+ | Qty: |
500-705 | Rota-Station (supplied WITH Rota-Spray) | 2295.00 | |
500-714 | Rota-Station 'Plus' (supplied WITH Rota-Spray 'Plus') | 2429.00 | |
500-704 | Rota-Station (supplied WITHOUT Rota-Spray) | 1331.00 | |
Jet 34d - Rotary Etching Machine
The
Jet 34d is a low cost rotary etching machine ideally suited to the manfacture
of prototype and small batch quantities of PCBs. As well as etching the unit
can also be used for spray developing and spray resist stripping. The machine
is of a sturdy PVC construction and is mounted on a stand which places the machine
at a convenient working height. Etching solution is contained in a tank at the
base of the machine. It is heated by a powerful quartz heater which assures
a short warm up time and constant temperature which is controlled electronically.
Boards up to 300 x 500mm can be etched although several smaller boards can be
placed in the special board carrier, the handle of which protrudes out of the
machine eliminating operator contact with the etchant. The machine etches one
side at a time and so for double sided PCBs the board holder is rotated 180
before the second etching cycle. In front of the etching chamber is a built
in overflow wash tank for the rinsing of the etched boards. The triangular form
of the body of the machine makes it ideal to place in a corner of a room. The
efficiency of this spray etcher has been proven by line resolution of better
than 0.1mm and etching speed of only 90 seconds with fresh ferric chloride.
Specifications | |
Maximum Panel Size: | 300 x 500mm |
Sump Capacity: | 20 litres |
Dimensions: | Width 650 x Depth 690mm |
Electrics: | 220-240V/50Hz 1ph. |
Order Code | Description | 1+ | Qty: |
35-16046 | JET 34D SPRAY PROCESSOR FOR 500MM PANELS | 2258.00 | |
Quick Order
Order Code | Qty | |
1. | ||
2. | ||
3. | ||
4. | ||
5. | ||
Secure Payments
Featured Products
PCB Instructional Video
20 minute DVD on PCB production techniques.
Buy a copy or view on-line.
Favorit Through Hole Plating
Favorit through hole mechanical press.