|
|
|
|
|
|
APM 2.0 Purple Full Kit Assembled
|
|
Price: $199.95
|
|
|
Here you can preorder your APM 2.0 kit. If you want to know more about this please click here. Some pictures are not accurate.
|
|
|
| |
|
|
|
|
|
|
|
ArduPilot Mega - Arduino Compatible UAV Controller w/ ATMega2560
|
|
Price: $64.00
|
|
|
This is a Arduino-compatible autopilot board using the new ATMega2560 processor. ArduPilot Mega is a fully programmable autopilot that requires an IMU "shield" and GPS module to create a functioning Unmanned Aerial Vehicle (UAV). The board comes with all the surface-mount parts already soldered, but requires the user to solder on connectors. RC interface firmware is already loaded, but the autopilot software must be downloaded and loaded onto the board by the user.
APM can be used for either airplanes or rotary wing aircraft, including quadcopters and other multicopters and traditional helicopters. The autopilot hardware is the same, and you can load whichever firmware is appropriate for the aircraft you've got via the free Mission Planner. (You may choose to add other sensors to improve performance for specific airframes, such as an airspeed sensor for airplanes or a magnetometer for mulitcopters).
All details and instructions can be found at each project's home page:
Airplane home page
Multicopters and helis home page
|
|
|
| |
|
|
|
|
|
|
|
Ardupilot Mega Case
|
|
Price: $12.99
|
|
|
Sturdy wooden case, designed to protect the Ardupilot and other components!
|
|
|
| |
|
|
|
|
|
|
|
ArduPilot Mega IMU Shield/OilPan Rev-H V1.0 (No pin headers)
|
|
Price: $149.95
|
|
|
The new ArduPilotMega IMU Shield! This board features a large array of sensors needed for UAV and Robotics applications, including three axis angular rotation and accelerations sensors, absolute pressure and temperature sensors, 16MBits data logger chip and more! It's designed to fit on top (or bottom) of the ArduPilot Mega board, creating a total autopilot solution when a GPS module is attached.
|
|
|
| |
|
|
|
|
|
|
|
Ardupilot Mega MinimOSD
|
|
Price: $65.99
|
|
|
Features and specifications: - ATmega328P with Arduino bootloader
- MAX7456 monochrome on-screen display
- FTDI cable compatible pinout
- Standard 6-pin ISP header
- Two independent power sections with an LED indicator on each
- Solder jumpers for combining the power sections
- +5V 500mA regulator for up to +12V supply input
- Solder jumper for PAL video option
- Exposed test points for HSYNC and LOS
- Dimensions: 0.7"W x 1.7"L (2.4" w/ pins as shown) x 0.3"H
|
|
|
| |
|
|
|
|
|
|
|
Ardupilot Mega TREX 450 Mounting plates
|
|
Price: $14.99
|
|
|
Ardupilot Mega TREX 450 Mounting plates
|
|
|
| |
|
|
|
|
|
|
|
ArduPilot Shield V2
|
|
Base Price: $36.00
|
|
|
Ardupilot Shield!
|
|
|
| |
|
|
|
|
|
|
|
ArduPilot Shield v2 (No 3.3V Regulator & Sensor)
|
|
Price: $20.00
|
|
|
Ardupilot Shield V2 Economic version (with no 3.3V Power regulator).
|
|
|
| |
|
|
|
|
|
|
|
ArduPilot Shield V2 Kit
|
|
Price: $57.20
|
|
|
Complete ArduPilot Shield Kit!!
|
|
|
| |
|
|
|
|
|
|
|
ArduPilotMega IMU Shield/OilPan Rev-H V1.0 (With Pins)
|
|
Price: $159.95
|
|
|
The new ArduPilotMega IMU Shield!
|
|
|
| |
|
|
|
|
|
|
|
ArduStation
|
|
Price: $57.20
|
|
|
New Portable Open-Source ArduPilot Ground Station (Arduino and Xbee Based). For use with original ArduPilot and ArduPilotMega 1.x. (Not currently compatible with ArduPilotMega 2.x or ArduCopter 2.x,)
|
|
|
| |
|
|
|
|
|
|
|
Bixler/SkySurfer Electronics Chassis (2 axis Camera Mount NOT included)
|
|
Price: $25.90
|
|
|
Bixler/SkySurfer Electronics Chassis (No Pan/Tilt Camera Mount)
|
|
|
| |
|
|
|
|
|
|
|
Bixler/SkySurfer Electronics Chassis (With 2 axis Camera Mount included)
|
|
Price: $35.90
|
|
|
Bixler/SkySurfer Electronics Chassis (With Pan/Tilt Camera Mount)
|
|
|
| |
|
|
|
|
|
|
|
Easy Star Electronics Chassis (2 axis Camera Mount NOT included)
|
|
Price: $25.90
|
|
|
Easy Star Electronics Chassis (No Pan/Tilt Camera Mount)
|
|
|
| |
|
|
|
|
|
|
|
Easy Star Electronics Chassis (With 2 axis Camera Mount included)
|
|
Price: $35.90
|
|
|
Easy Star Electronics Chassis (With Pan/Tilt Camera Mount)
|
|
|
| |
|
|
|
|
|
|
|
Full ArduPilot Mega kit (BACKORDER)
|
|
Price: $250.00
|
|
|
The ArduPilot kit contains:
-The Arduino compatible ArduPilot Mega platform!
-The IMU sensor shield, better known as the"Oil Pan" Revision H!
-The Mediatek GPS with the basic adapter!
- 5x Servo Extension Cable 5cm Female-Female
- 1x EM-406/uBlox/MTK Adapter Cable 5 cm
|
|
|
| |
|
|
|
|
|
|
|
Full ArduPilot Mega kit (soldered, code loaded and ready to fly) from Udrones!
|
|
Price: $299.95
Buy at Udrones
|
|
|
The ArduPilot kit contains:
-The Arduino compatible ArduPilot Mega platform!
-The IMU sensor shield, better known as the"Oil Pan" Revision H!
-The Mediatek GPS with the basic adapter!
- 1x EM-406/uBlox/MTK Adapter Cable 5 cm!
|
|
|
| |
|
|
|
|
|
|
|
HITEC HS-35HD SUB MICRO SERVO
|
|
Price: $32.95
|
|
|
Never before has a servo so small delivered so big. The HS-35HD
Ultra Nano servo offers unprecedented durability thanks to our
exclusive Metal-Karbonite gear train. Delivering maximum performance
at minimum weight, the HS-35HD is destined to become an industry
favorite. Its long life and uniquely engineered gear train will make it
one of the most reliable and efficient tiny servos on the market.
The HS-35HD is perfect for micro 3D and sport aircraft as well as many
small helicopters.
Specifications
Bearing Type: None
Speed (4.8V/6.0V): 0.12 / 0.10
Torque oz./in. (4.8V/6.0V): 11.2 / 14
Torque kg./cm. (4.8V/6.0V): 0.8 / 1.0
Size in Inches: 0.74 x 0.30 x 0.62
Size in Millimeters: 18.6 x 7.6 x 15.5
Weight ounces: 0.16
Weight grams: 4.5
|
|
|
|