Tools, parts, kits for diy ers. curious inventor www.curiousinventor.com2016-01-06⚑blog ⚑music http://www.curiousinventor.com/store/product/236 desolder ing a chip with a lot of legs. No idea how to solder a chip without any legs. Ask away. Published date May 26, 2015 Catagory Soldering The Essence of How Bitcoin Works A brief intro to the main ideas behind How Bitcoin Works, including how money is transferred, who keeps track of it, and how the whole thing is secured. Published date September 5, 2014 Catagory News SMT Stencil Review, including BGA Reballing A review of
Pickup v7 acting up. jemsite www.jemsite.com2016-04-21⚑blog http://www.jemsite.com/forums/f35/pickup-v7-acting-up-133443.html desolder the wires when you did the pup change. I had a problem like this before and it was an issue with the 5 way selector after soldering a new pup into the guitar. MatiasTolkki View Public Profile Find all posts by MatiasTolkki 3 11.10.2014, 09 44 AM madasahatter Guest Location Louisiana, USA Posts n
Solder stations, desoldering tools, soldering irons www.soldertoolsdepot.com2012-04-02http://www.soldertoolsdepot.com desolder ing Tools, Soldering Irons Marlin P. Jones Assoc, Inc. P.O. Box 530400, Lake Park, Florida 33403 Toll Free 1.800.652.6733 0 item s in cart View Cart Suppliers of Soldering Stations, Digital Solder Stations, desolder Tools, Rework Stations, SMD desolder Stations, Soldering Irons, Solder, Solder Paste, desolder ing, Breadboards, Solderless Bread Boards, Electronic Breadboards, Heat Shrink Tubing, Shrink Tubing, PC Etching,
Cmospwd. cgsecurity www.cgsecurity.org2013-03-08http://www.cgsecurity.org/cmospwd.html desolder the eeprom with hot air or you can try to clip the eeprom. With the eeprom programmer, backup your eeprom and run cmospwd d l eeprom backup. If you don t see the password, you can try to fill the eeprom with zero or FF, don t forget the reset the cmos. Acer Acer 630 eeprom 93c56. Acer Aspire 1522 Under the keyboard, search for switch SW1 on the left of the fan jack, switch the pin 1 to on, turn on the notebook, press F2
Electronics. haha bird www.hahabird.com2013-02-15http://www.hahabird.com/category/projects/electronics/ desolder easily, but be sure you don 8217;t keep the heat on too long or you might melt the plastic directly underneath. Put the new part in through the holes in the case, bend the leads, then trim them to fit the tabs. The tabs don 8217;t have any holes for the leads to go through, so just hold the lead onto the existing solder and heat it up. When it was done, the bottom half of the case clipped right on and we were back in
Assembling the pix.6t4 netduino.powered hand.held game system. pete brown [..] 10rem.net2012-02-11⚑games ⚑tech ⚑blog http://10rem.net/blog/2012/01/21/assembling-the-pix-6t4-netduino-powered-hand-held-game-system desolder mine and put a new LED underneath I did a few more steps before taking another photo. Resistors, the power connector underside , and a transistor are all in place. In case you haven t gathered, I m not a big fan of having resistors stand up in general. In fact, I hate them in all but the most cramped design with huge multi.watt resistors. They re easy to knock over, bend, etc, and they re more difficult to solder in that
Byoc. the world finest diy guitar effects kits www.buildyourownclone.com2012-02-13⚑music http://www.buildyourownclone.com desolder braid. It also includes our Confidence Boost Kit and Signal Tester Kit. The Confidence Boost Kit is an extremely simple project that allows the builder to become familiar with various components and get some practice soldering. The signal tester is perhaps the most valuable trouble shooting tool a pedal builder can have. The starter package also includes either 1 or 2 of our most popular and easy.to.build kits. Choose
Camcorder crt aren t rocket science. blogs. the vintage computer forums www.vintage-computer.com2012-11-23⚑blog ⚑tech http://www.vintage-computer.com/vcforum/entry.php?380-camcorder-crt-s-aren-t-rocket-science desolder and remove them and we ll start here. In my case it was the connector marked PG822. We are looking for the ground, power in, and composite in. Start with finding the negative lead on a cap somewhere on the board, at best close to the former connector and with the Digital Multimeter in ohms poke at the pins on the connector until you find which one has a connecton to the negative lead. This will probably be your ground. I
Nslu2.linux. howto overclocktheslug browse www.nslu2-linux.org2016-03-28⚑tech http://www.nslu2-linux.org/wiki/howto/overclocktheslug desolder one resistor albeit small, it rather easy.You might need some solderwick, if you make a mess. The process goes like this Read the whole procedure first. Make sure you understand what you re doing. Optional To verify that your slug is slow; from a telnet window, cat proc cpuinfo You should see a BogoMIPS value of around 133. Bogo means Bogus , so don t worry if it. 10. Plug in your soldering iron. While waiting for it to
Emaze networks blog.emaze.net2012-03-14⚑tech ⚑shop http://blog.emaze.net desolder it is not suggested to avoid breaking circuit board, better try to cut bolts with a grinding tool. With this information at hand we can search for datasheet on vendor site or just google for it. It can happen that there are epoxy protected areas a clear indication of a particularly sensitive device which are not easy to inspect. One way is to try to heat the epoxy and then carefully remove it using a sharp tool avoiding
Tools, parts, kits for diy ers. curious inventor www.curiousinventor.com2016-01-06⚑blog⚑music http://www.curiousinventor.com/store/product/236 desolder ing a chip with a lot of legs. No idea how to solder a chip without any legs. Ask away. Published date May 26, 2015 Catagory Soldering The Essence of How Bitcoin Works A brief intro to the main ideas behind How Bitcoin Works, including how money is transferred, who keeps track of it, and how the whole thing is secured. Published date September 5, 2014 Catagory News SMT Stencil Review, including BGA Reballing A review of
Pickup v7 acting up. jemsite www.jemsite.com2016-04-21⚑bloghttp://www.jemsite.com/forums/f35/pickup-v7-acting-up-133443.html desolder the wires when you did the pup change. I had a problem like this before and it was an issue with the 5 way selector after soldering a new pup into the guitar. MatiasTolkki View Public Profile Find all posts by MatiasTolkki 3 11.10.2014, 09 44 AM madasahatter Guest Location Louisiana, USA Posts n
Assembling the pix.6t4 netduino.powered hand.held game system. pete brown [..] 10rem.net2012-02-11⚑games ⚑tech ⚑bloghttp://10rem.net/blog/2012/01/21/assembling-the-pix-6t4-netduino-powered-hand-held-game-system desolder mine and put a new LED underneath I did a few more steps before taking another photo. Resistors, the power connector underside , and a transistor are all in place. In case you haven t gathered, I m not a big fan of having resistors stand up in general. In fact, I hate them in all but the most cramped design with huge multi.watt resistors. They re easy to knock over, bend, etc, and they re more difficult to solder in that
Camcorder crt aren t rocket science. blogs. the vintage computer forums www.vintage-computer.com2012-11-23⚑blog⚑tech http://www.vintage-computer.com/vcforum/entry.php?380-camcorder-crt-s-aren-t-rocket-science desolder and remove them and we ll start here. In my case it was the connector marked PG822. We are looking for the ground, power in, and composite in. Start with finding the negative lead on a cap somewhere on the board, at best close to the former connector and with the Digital Multimeter in ohms poke at the pins on the connector until you find which one has a connecton to the negative lead. This will probably be your ground. I
Tools, parts, kits for diy ers. curious inventor www.curiousinventor.com2016-01-06⚑blog ⚑musichttp://www.curiousinventor.com/store/product/236 desolder ing a chip with a lot of legs. No idea how to solder a chip without any legs. Ask away. Published date May 26, 2015 Catagory Soldering The Essence of How Bitcoin Works A brief intro to the main ideas behind How Bitcoin Works, including how money is transferred, who keeps track of it, and how the whole thing is secured. Published date September 5, 2014 Catagory News SMT Stencil Review, including BGA Reballing A review of
Byoc. the world finest diy guitar effects kits www.buildyourownclone.com2012-02-13⚑musichttp://www.buildyourownclone.com desolder braid. It also includes our Confidence Boost Kit and Signal Tester Kit. The Confidence Boost Kit is an extremely simple project that allows the builder to become familiar with various components and get some practice soldering. The signal tester is perhaps the most valuable trouble shooting tool a pedal builder can have. The starter package also includes either 1 or 2 of our most popular and easy.to.build kits. Choose
Assembling the pix.6t4 netduino.powered hand.held game system. pete brown [..] 10rem.net2012-02-11⚑games⚑tech ⚑blog http://10rem.net/blog/2012/01/21/assembling-the-pix-6t4-netduino-powered-hand-held-game-system desolder mine and put a new LED underneath I did a few more steps before taking another photo. Resistors, the power connector underside , and a transistor are all in place. In case you haven t gathered, I m not a big fan of having resistors stand up in general. In fact, I hate them in all but the most cramped design with huge multi.watt resistors. They re easy to knock over, bend, etc, and they re more difficult to solder in that
Emaze networks blog.emaze.net2012-03-14⚑tech ⚑shophttp://blog.emaze.net desolder it is not suggested to avoid breaking circuit board, better try to cut bolts with a grinding tool. With this information at hand we can search for datasheet on vendor site or just google for it. It can happen that there are epoxy protected areas a clear indication of a particularly sensitive device which are not easy to inspect. One way is to try to heat the epoxy and then carefully remove it using a sharp tool avoiding